Running the Gauntlet

Running the Gauntlet

Back to work needs to be well and good

Not long ago when visiting a colleague’s office, it was protocol to arrive early to run the gauntlet of the visitor management check-in that awaited, a process that might gladly be endured now if just for a brief return to some normalcy. Before the pandemic, many visitor management procedures were under scrutiny, with many organizations making visitor management improvements a top-level initiative. As we prepare our back-to-work efforts, visitor management will serve as the front lines for mitigating health risks in offices and facilities.

A TRUST RELATIONSHIP

Let’s take a step back. At its core, identity management helps an organization distinguish who it knows, while maintaining and improving this knowledge throughout an individual’s affiliation with the organization. When we make a new employee hire, for example, we use an I-9 or similar process by which we positively identify someone using government-issued identification. Often, background checks are in place to ensure suitability for the workplace, kickstarting a trust relationship rather than forming it organically over months and years.

Just as most organizations do not have the time to establish their employees’ identities and trustworthiness naturally, there is often less time for visitors. This is why visitor management is one of the highest-risk activities in a physical security program. The result of visitor management is an organization’s ability to routinely admit people they know the least about -- visitors who now walk among trusted employees -- as though the visitors were trusted in a similar fashion.

Prior to the pandemic, this risk was being addressed by “high assurance” visitor management systems. These systems work rapidly to establish a visitor’s identity, often before they arrive in the lobby. The day of the visit is preceded by continuous vetting and, upon arrival, the system binds a visitor to a high-assurance credential.

That credential allows for tracking of the visitor’s interaction with and passage through the access control systems also used by the employees. High assurance visitor management seeks to elevate identity management for visitors to mimic the degree of vetting that we already perform for employees. As COVID-19 vaccinations roll out and organizations form their backto- work plans, the need to balance identity management for employees and visitors has moved to center stage. Here’s why:

The word is suitability, but with a twist. In corporate identity management, suitability historically meant background checks on employees and occasionally visitors. At the most, forward-leaning enterprises and throughout the intelligence community, this is augmented with reputational data locally captured from previous interactions with a person and/ or behavioral deviations from a historical reputation baseline.

FAITH IN THE FUTURE

These are the generally accepted ways to gain confidence in suitability. It is often said that trust is faith in future performance based on past behavior, which is the way our brains are wired to trust. We listen more often to and believe in information that confirms what we want to believe.

Behavioral psychologists know this as confirmation bias. When it comes to making good security decisions, another aspect of our trust psychology works against us. The Harvard Business Review succinctly captures this in a 2009 article about rethinking trust: “Once we’ve made a decision to trust, we tend not to revisit it.”

These effects can be seen in our everyday lives right now. Our bias might lead us to believe our friends and families are at a lower risk of actively carrying COVID-19 than a coughing stranger in a store. These natural biases work against our ability to make good and repeatable security decisions, which challenges our back-to-work initiatives.

Organizations will ask their security teams to perform some degree of wellness checking on understandably anxious employees who just spent a minimum of a year and a half working from home. Employees will scrutinize security programs and back-to-work safety measures. An obvious area where a back-to-work program might falter is if an organization has different wellness requirements for employees and visitors. High assurance visitor management was designed to close the gap between the handling of employees and visitors in ways not seen by most employees. Wellness screening will now put disparities on full display.

Successful back-to-work initiatives necessarily include wellness screenings, which are the tip of the spear as we welcome people back into our spaces. However, not all wellness screening is created equal. Here are five things to consider as you move forward with your back-to-work initiatives. Pay special attention to the areas visible to your employees. Direct observation will help employees gain confidence in workplace safety.

Wellness is the new suitable. While wellness is a new dimension of suitability, it does not replace background checks. Background checks continue to be essential for higher security facilities. Wellness checking is important for every facility.

Wellness is a temporal and dynamic attribute. Wellness screenings must occur daily, as today’s results have no bearing on tomorrow. Employees we know and see in the office daily represent the identical wellness risk as a visitor we have never seen before. Wellness screenings must be done for everybody -- every day -- using the same process and same tools. If any person will be accessing any part of a facility where any of your employees might be, wellness screening must be done.

Wellness screening is for, not by humans. In any security discipline, the decision between manual security controls and investment in automated controls is expressed in two questions: Is this a repetitious activity (and inherently risks degradation over time)? What is the impact/cost of any failure of the control? Even without the bias challenges, wellness screening should not be performed manually.

Wellness screening can be efficient. Security programs have tried to make physical access and visitor management as low friction as possible and should do the same for wellness screening. Wellness screenings are here to stay, as we do not know what pandemic episodes loom in our future. If you make this necessity bearable, it won’t befall the same fate as other security initiatives that didn’t take user experience into account. A wellness screening process too cumbersome will first suffer active attempts to circumvent it, maturing to subversion and naturally concluding with abandonment.

Make wellness matter. Security programs measure the effectiveness of their security controls. If a wellness screening capability has no discernable effect, it will be both ineffective and obvious to the entire organization that it is just security theater. Demonstrating that wellness screening affects access to the facility in an automated way can generate confidence in the safety of a workplace.

An organization that implements a capability to automatically disable facility access for those who fail wellness screening (or disable access for everyone nightly) can inspire confidence with this suitability information. In this context, wellness screening is due diligence. Doing something with the knowledge gained is due care. Considering how liability has historically been apportioned in similar situations, this requires careful examination by risk, legal and human resource departments.

The best security capabilities deployed in recent times all share one quality: innovation. Systems that achieved their protective goal but brought other added value in so doing. As security practitioners, we should be looking for ways to do this. Back-to-work represents a possibly once-in-a-career opportunity to address a risk that no one has worked on before. Managing ever-changing and evolving risks is our norm. It’s up to us to make back-to-work, work well.

This article originally appeared in the April 2021 issue of Security Today.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • ComNet CNGE6FX2TX4PoE

    The ComNet cost-efficient CNGE6FX2TX4PoE is a six-port switch that offers four Gbps TX ports that support the IEEE802.3at standard and provide up to 30 watts of PoE to PDs. It also has a dedicated FX/TX combination port as well as a single FX SFP to act as an additional port or an uplink port, giving the user additional options in managing network traffic. The CNGE6FX2TX4PoE is designed for use in unconditioned environments and typically used in perimeter surveillance. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • AC Nio

    AC Nio

    Aiphone, a leading international manufacturer of intercom, access control, and emergency communication products, has introduced the AC Nio, its access control management software, an important addition to its new line of access control solutions. 3